Error Codes - BOMANN GSP 5703 User Manual

Problem
Cloudiness on Combination of soft water
glassware and too much detergent
Tea or coffee stains
Yellow or brown film
on inside surfaces
Iron deposits in water can
cause an overall film
White film on inside
Hard water minerals
surface
The detergent dis-
Clogged detergent residue
penser lid cannot be
is blocking the catch
closed properly
Detergent left in Dishes block detergent
dispenser cups Cups
Steam Normal phenomenon
Black or gray marks Aluminum utensils have
on dishes rubbed against dishes
Water standing on
This is normal
the bottom of the tub
Overfill dispenser or rinse
aid spills
Dishwasher leaks
Dishwasher isn't level

Error Codes

When some malfunctions happen, the appliance will indicate error codes to warn you
LED's Codes
LED1, LED2 flash
LED 1 = Intenisve
LED 2 = Normal LED1, LED5 flash
LED1, LED4 flash
LED 3 = Rapid
LED2, LED3 flash
LED 4 = 3h
LED2, LED4 flash
LED3, LED4 flash
LED 5 = 6h
WARNING:
- If overflow occurs, turn off the main water supply before calling a service.
- If there is water in the base pan because of an overfill or small leak, the water should be removed
before restarting the dishwasher.
If a problem still persists after following the steps above, please contact your distributor or a techni-
cian.
Are you interested in other Bomann products? Please visit our website:
Possible Causes
Use less detergent if you have soft water and select a shortest
cycle to wash the glassware and to get them clean.
Using a solution of 1/2 cup of bleach and 3 cups of warm water to
remove the stains by hand.
You have to wait for 20 minutes after a cycle to let the heating
elements cool down before cleaning interior; otherwise, burns will
happen.
You have to call a water softener company for a special filter.
To clean the interior; use a damp sponge with dishwasher deter-
gent and wear rubber gloves. Never use any other cleaner than
dishwasher detergent for the risk of foaming or suds.
Clean the detergent from the catch.
Re-loading the dishes properly.
There is some steam coming through the vent by the door latch
during drying and water draining.
Use a mild abrasive cleaner to eliminate those marks.
A small amount of clean water around the outlet on the tub bot-
tom keeps the water seal lubricated.
Be careful not to overfill the rinse aid dispenser. Spilled rinse aid
could cause oversudsing and lead to overflowing. Wipe away any
spills with a damp cloth.
Make sure the dishwasher is level.
Meanings
Door open
Water inlet
Water drainage
Temperature sensor
Overflow/leakage
Water leakage
www.bomann.de
What To Do
Possible Causes
The door is opened when the dishwasher
is operating
Water inlet malfunction
Water drainage malfunction
Temperature sensor malfunction
Overflow occurs/Water leakage occurs
Water leakage occurs
19
12/2011