Advertisement

Quick Links

User Manual
HOUSEHOLD-DISHWASHER
GSP 5703
Please read this manual carefully and keep for future reference!
1
12/2011

Advertisement

Table of Contents
loading

Summary of Contents for BOMANN GSP 5703

  • Page 1 User Manual HOUSEHOLD-DISHWASHER GSP 5703 Please read this manual carefully and keep for future reference! 12/2011...
  • Page 2: Table Of Contents

    VERVIEW Please read this user manual carefully before using the appliance. This user manual contains important information for installation, operation and maintenance. An improper using can be dangerous especially for children. Please keep all documents in a safe place for future reference. Pass it on to any subsequent owner of the appliance. The device must be transported and moved in an upright position and if necessary the unit can be tilted slightly.
  • Page 3: Safety Precautions

    1. S AFETY RECAUTIONS Please read all instruction and safety information carefully and follow them accordingly. Please keep this manual with all information in a safe place for future reference! Grounding Instructions This appliance must be grounded. In the event of a malfunction or breakdown, grounding will re- duce the risk of an electric shock by providing a path of least resistance of electric current.
  • Page 4: Disposal Of Used Appliances

    The minimum permissible inlet water pressure is 0.04 Mpa. Remove the door to the washing compartment when removing an old dishwasher from service or discarding it. Unpacking Check the device for any possible transport damage. Do not install a damaged device. In case of damage, please contact your distributor.
  • Page 5: Operation Instruction

    3. O PERATION NSTRUCTION IMPORTANT: To get the best performance from your dishwasher, read all operation instructions carefully before using it for the first time. Control panel 1 On/Off button and control lamp: to turn on/off 3 Child lock: press and hold the program buttons the power supply.
  • Page 6: Prior Using For The First Time

    4. P RIOR SING FOR THE IRST Before using your dishwasher for the first time: A. Set the water softener B. Pour 800 ml of water inside the salt container and then fill with dishwasher salt. C. Fill the rinse aid dispenser. D.
  • Page 7: Fill The Rinse Aid Dispenser

    Only fill with salt just before starting one of the complete washing programs. This will prevent any grains of salt or salty water, which may have been split, remaining on the bottom of the machine for any period of time, which may cause corrosion. A.
  • Page 8: Function Of Detergent

    Rinse Aid Dispenser 1. To open the dispenser; turn the cap to the "open" (left) arrow and lift it out. 2. Fill the rinse aid into the dispenser, be careful not to overfill. 3. Replace the cap by inserting it aligned with "open" arrow and turning it to the "closed" (right) arrow. The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks.
  • Page 9 Detergent Tablets Detergent tablets of different brands dissolve at different speeds. For this reason some detergent can- not dissolve and develop their full cleaning power during short programs. Therefore please use long programs when using detergent tablets, to ensure the complete removal of detergent residuals.
  • Page 10: Loading The Dishwasher Baskets

    5. L OADING THE ISHWASHER ASKETS Recommendation Consider buying utensils which are identified as dishwasher-proof. Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further information from the detergent manufacturers. For particular items, select a program with as low a temperature as possible. To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the pro- grams has ended.
  • Page 11: Method For Loading Normal Dishes

    Method for Loading Normal Dishes Loading the upper basket: The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they will not get moved by the spray o f water A Cups B Glasses...
  • Page 12: Cutlery Basket, Cutlery Shelf

    Folding Racks of the lower Basket For better stacking of pots and pans, the spikes can be folded down as show in the picture. Cutlery Basket, Cutlery Shelf Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side bas- kets, the spoons should be loaded separately into the appropriate slots, especially long utensils should b e placed in the horizontal position at the front of the upper basket as shown in the picture Example for loading:...
  • Page 13: Starting A Program

    6. S TARTING A ROGRAM Cycle Table Running Cycle Selection In- Description of Detergent Energy Water Program Time formation Cycle Pre/main (kWh) (Min.) For the heaviest soiled Pre-wash loads, such as pots, Main wash (60° C) 5/25 g pans, casserole dishes Rinse (or Tablets w/o and dishes that have...
  • Page 14: At The End Of The Cycle

    Forgot to Add a Dish? Forgotten dishes can be added any time before the detergent container opens. 1. Open the door a little to stop the program. 3. Add forgotten dishes. 2. After the spray arms stop working, you can open 4.
  • Page 15: Caring For The Dishwasher

    By unscrewing the coarse filter, you can remove the filter system. Step 1: Turn the coarse filter anti- clockwise and lift it up. Step 2: Lift the flat filter up. NOTE: When following this procedure from step1 to step 2, the filter system will be removed; when following it from Step 2 to Step 1, the filter system will be installed.
  • Page 16: Installation Instruction

    How to keep your Dishwasher in Shape After Every Wash When not in Use for a Long Time After every wash, turn off the water supply to the It is recommend that you run a was h cycle with appliance and leave the door slightly open so that the dishwasher empty and the n remove the plug moisture and odours are not trapped inside.
  • Page 17: Power Connection

    Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear.
  • Page 18: Start The Dishwasher

    Check with a qualified electrician or service representative if you are in doubt whether the appli- ance is properly earthed. Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet, please have a qualified electrician to install a proper outlet. If the supply cord is damaged, it must be replaced by a qualified person in order to avoid a hazard.
  • Page 19: Error Codes

    If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. If a problem still persists after following the steps above, please contact your distributor or a techni- cian. Are you interested in other Bomann products? Please visit our website: www.bomann.de 12/2011...
  • Page 20: Technical Data

    Results may vary greatly according to quantity and pollution of the dishes, water hardness, amount of detergent, etc. The manual is based on the European Union's standards and rules. Distribution: C. Bomann GmbH • Heinrich-Horten-Str. 17 • D-47906 Kempen 12/2011...

Table of Contents