hager 53600 Manual page 7

53600
53620 - 53621
Products presentation
Bell push-button/configuration
Label holder
Indicator light
Volume control knob
Tunes selection button
Configuration button
Indicator light
Base
Installation of 53620 and 53621
4
Bouton poussoir sonnette
FR
et packs carillon
Trasmettitore H.F
IT
e kit carillon
Painike
FI
ja kumistinpakkaukset
Bell push-button and chime packs
GB
53620
Mains socket adapter (ref. 53699).
When the adapter is connected, the batteries
are automatically disconnected.
Battery housing
Note: the receiver plays all tunes on first power-on
or after reset.
T
M r D U P O N
53600
53621
• Push-button 53600 is a radio bell that allows
controlling one or several chime receiver.
• Kit 53620 includes a push-button 53600 and
a 3-tune receiver 53610.
• Kit 53621 includes a push-button 53600 and a
10-tune receiver 53611.
Pressing the push-button once activates the
chimes of the associated chime receiver(s). An
indicator light signals each button's pressure.
Each receiver may be associated with one or
more transmitters (a maximum of 16) of the
same range.
Installation of 53600
The push-button can be fixed using adhesive
(provided) or with screws (provided) on a clean
and smooth surface.
• Fix the support to the wall with adhesive.
or
• Remove the cover by inserting a screwdriver in
the slots located at the base of the push-button.
Push up slightly and turn the screwdriver to
release the fixing clip.
• Remove the front face by pulling on it.
2
1
• Fix the support to the wall with the 2 screws
provided.
Fixing the label
• Once the cover is removed, pull on the label
holder.
• Insert the label in the space provided.
• Replace the label holder in its housing.
• Replace the front face.
Replacement of battery
• Remove the cover (see above) and insert a new
battery.
• Replace the front face.
M r DU PO NT