Advertisement
Product assembly
Moritz Dining Table
836 33401
Step 5
Parts, fittings and tools
With 2 people carefully turn the table back into the upright position. The stainless steel base is protected with a
plastic protective film. To remove, gently peel film away from the base by hand. Do not use any sharp
im-
plements to cut from the base as this will damage the surface. Once the plastic is fully unstuck from the base, you
may find that you have a ring of loose plastic film left around the stem. If necessary, cut through one side of the film
with scissors to remove from around the stem. TAKE CARE not to touch any part of the metal on the table
with the sharp blades as this will cause permanent damage.
Step 6
Parts, fittings and tools
Adjust the levellers on the underside of the base in order to level the table.
7
03/05/2019
Advertisement
