Advertisement
Product assembly
Moritz Dining Table
836 33401
Step 1
Parts, fittings and tools
2
C
Please note, the base is very heavy and needs to be unpacked as near to it's final location as possible. Very
carefully remove the base and stem unit from the packaging. To avoid scratches and possible damage carry out all
steps on a clean, soft surface such as a rug or large cloth. Do not remove the protective film on the base until Step
6. Carefully turn the base upside down, and use the allen key to gently loosen each of the 5 screws by 1 turn only
(turn in anticlockwise direction). This important step is to prepare for fixing the glass top in Step Two.
Step 2
Parts, fittings and tools
1
2
With at least two people, turn the base over so that it is upright. Whilst 2 people hold the glass top, the third
person should help guide the bosses on the glass top into the cups at the top of the metal stems one by one until
all are located. Take care not to scratch the glass at this stage.
03/05/2019
2
1
2
5
C
LOOSEN BY 1 X TURN
ONLY!
Advertisement
