Smart Probe Settings - TESTO 510i Instruction Manual

6 Using the App

6.4. Smart Probe settings

1. Press
3. Select the Smart Probe to display the details you would like to
see.
- A list with details about the Smart Probe appears in the
Information
4. You can activate the damping in the
If the readings fluctuate wildly, it is advisable to damp the readings.
The probe is connected to the SMART App.
1
Click on
Main menu opens.
2
Click on Sensors.
The Sensors menu opens.
3 Click on the required sensor.
Information is displayed about the model, order number, serial number
and firmware version.
4 Click on the
The settings window opens.
5 Enable Activate damping
6 Click on Average of the measured
Window for Average of the measured values opens.
7 Enter a value between 2 and 20 seconds.
14
-> Sensors.
tab.
.
Settings tab.
using the slider.
Settings tab.
values.