Advertisement
Quick Links
OPERATION INSTRUCTIONS FOR THE EQUALIZER EZ8 REGISTER BOOSTER
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT NOTICE
With the use of any electrical appliance, it is important to observe all basic precautions to minimize the risk associated with use, such as electrical shock, fire, or injury to
persons. Read these instructions before using your Equalizer Register Booster
NEVER EXPOSE YOUR EQUALIZER REGISTER BOOSTER™ TO TEMPERATURES OVER 140°F (60°C)
IMPORTANT WARNINGS
1. The Equalizer Register Booster
for the register is 140° Fahrenheit or 60° Centigrade. Your Equalizer Register Booster
2. Do not in any way block the air grilles of the Equalizer Register Booster
impeller to contact these grilles and damage the unit.
3. Do not operate the Equalizer Register Booster
damaged, or if the housing is damaged or broken. Return the unit for inspection, replacement, or repair.
4. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will not be tripped over.
5. The Equalizer Register Booster
where it may come in contact with water on the surface or excessive moisture in the airstream..
6. The Equalizer Register Booster
7. Never insert any object or allow any object to enter the Equalizer Register Booster
8. Do not use the Equalizer Register Booster
9. The Equalizer Register Booster
and will void any warranty by the manufacturer.
10. Do not use strong detergents or flammable liquids to clean the Equalizer Register Booster
11. THERE ARE NO SERVICEABLE PARTS INSIDE. Attempting to disassemble the unit will void any and all warranty.
12. To avoid serious injury, never operate the Equalizer Register Booster™ with the fan inlet guard removed.
CLEANING AND MAINTENANCE
Before cleaning the Equalizer Register Booster
brush attachment of your vacuum cleaner, or a cloth that has been lightly moistened with water and a mild, non-abrasive detergent. Take special care to avoid liquid
entering the interior of the unit around buttons, knob, indicator lights, and power entry.Dust accumulation in the interior of the unit may be removed by using the small round
brush attachment of your vacuum cleaner. Accumulation of dust in the interior will be minimized by regular replacement of your furnace filter as recommended by the
manufacturer.
THREE YEAR LIMITED WARRANTY
Subject to the following limitations, Suncourt Inc. (manufacturer) warrants that the Equalizer Register Booster
but not exceeding 4 (four) years from date of manufacture, remain free from appearance of defects in workmanship or materials. This warranty is subject to the following
limitations: (a) manufacturer's liability is limited to the replacement or repair of the unit, as decided by the manufacturer; (b) a defective unit must be returned, prepaid, with
proof of purchase, well packaged to avoid damage in transit; and (c) this warranty does not apply to defects resulting from the alteration, abuse, accidental damage,
unauthorized repair, or misuse of the unit. This warranty is given in lieu of all other warranties, guarantees, and conditions on manufacturer's part, and the manufacturer shall
have no tortious or other liability in respect to this Equalizer Register Booster
Returns without this RGA number will not be accepted. Actual product appearance may differ from illustrations. Suncourt reserves the right to modify any or all of its products'
features, designs, components and specifications without notice.
™
will be as warm as the air that is delivered from the register of your forced air furnace and/or cooling system. The maximum temperature
with a damaged plug or cord, if the unit malfunctions, becomes noisy when operating, has been dropped or otherwise
™
should never be exposed to moisture. Do not use the unit in an open window, bathroom, laundry, or any other area where it may come
™
is designed for indoor use only.
™
™
near flammables such as gasoline, paint, or natural gas.
is intended for use as described in the instructions only. Other use may cause fire, electrical shock, damage to the unit, or injury to persons
™
™
disconnect the power cord from the outlet. Dust may be removed from the exterior surfaces using a soft cloth, the round
.
™
should never be exposed to higher temperatures or temperatures below freezing.
™
. Pressure on the bottom or top grilles of the Equalizer Register Booster
™
through the bottom or top grilles, as this may damage the unit or cause it to malfunction.
™
.
™
. Ship unit to Suncourt Inc. only after obtaining a Return Goods Authorization (RGA) number.
™
™
will, for 3 (three) years from date of original retail purchase,
™
MODEL: HC600
may cause the fan
™
Advertisement
Related Manuals for Suncourt HC600
Summary of Contents for Suncourt HC600
- Page 1 . Ship unit to Suncourt Inc. only after obtaining a Return Goods Authorization (RGA) number. ™ Returns without this RGA number will not be accepted. Actual product appearance may differ from illustrations. Suncourt reserves the right to modify any or all of its products' features, designs, components and specifications without notice.
- Page 2 Mode Indication Speed Indication 1 - Mode Button 2- Adjustment Knob 3 - Speed Button 1 – Mode Button The Equalizer Ez8 Register Booster™ has 4 distinct operating modes that can be selected in order by pressing the mode button. The mode button is located above the adjustment knob on the front panel. Above the mode button, a colored light with a specific shape will shine through the surface and remain lit while the unit is powered.
- Page 3 GENERAL SETUP Allow your unpacked unit to acclimate to room temperature for at least 30 minutes as noted in step 1 below. Refer to the diagram on the previous page for names and locations of controls mentioned below. 1. Keep the unit away from the existing register's airstream and allow the unit to acclimate to room temperature for 30 minutes before applying power.
- Page 4 1. After following the general setup procedures above, ensure the red Heat mode indication light is lit. 2. In Heat mode, the adjustment knob regulates the temperature setpoint of the booster. a. With the knob fully counter -clockwise, this represents a setpoint temperature of approx. 65F (18C). b.
Need help?
Do you have a question about the HC600 and is the answer not in the manual?
Questions and answers
how can I acquire a wall mounting kit for the Suncourt hc600
The Suncourt HC600-WK model comes with a mounting kit included in the package. If you need a replacement or additional wall mounting kit, you may need to check with the seller or manufacturer directly for availability.
This answer is automatically generated
what are the installation instructions
The installation instructions for the Suncourt HC600 include:
1. Plug the power supply into a 110V outlet. You can add length to the cord using a 2.1mm ID / 5.5mm OD low-voltage extension cord.
2. If wall mounting, use a wall mounting kit (instructions for this are separate).
3. Before making initial settings, do not place the unit over the supply register while the forced air system is running.
4. Wait at least 5 minutes after the forced air cycle ends for temperatures near the register to stabilize.
5. For wall-mounted units, start with the mode set to “off” by pressing the mode button until no lights are lit.
6. Wait at least 10 minutes after the forced air system ends before selecting a temperature-sensitive mode.
7. The factory default settings are:
- Operation mode: Auto
- Fan speed: Speed #3 (out of 8)
- System recovery (on/off delay): Short (knob fully counter-clockwise)
8. Press the mode button to cycle through modes: Auto, Fan, and others as needed.
Further adjustments can be made following the provided instructions.
This answer is automatically generated
Mode button flashes, blue then orange blue then orange