Canon imageFORMULA DR-2580C Startup Manual page 26

• If you are using Windows XP, the [Found New Hardware Wizard] dialog
box appears.
1. Insert the setup disc into the computer's CD-ROM drive.
2. On the Welcome to the Found New Hardware Wizard screen, select
[Install from a list or specific location (Advanced)], and then click the
[Next] button.
3. Select [Search for the best driver in these locations], and then clear the
[Search removable media (floppy, CD-ROM...)] check box. Select
[Include this location in the search], enter "D:\INF" (assuming that "D"
is the letter assigned to your CD-ROM drive), and then click the [Next]
button.
4. Although a message appears indicating that the driver "has not passed
Windows logo testing", click the [Continue Anyway] button in the
[Hardware Installation] dialog box.
5. Click the [Finish] button on the Completing the Found New Hardware
Wizard screen.
Note
The DR-2580C is registered as "CANON DR-2580C USB" in the Imaging
Device directory.
IMPORTANT
The job function (see Scanning with "Job Function" on p. 60.) will no longer
be available if scanner recognition is cancelled part way through. Be sure to
perform the scanner recognition procedure all the way to the end.
24
Installing the Scanner