Canon imageFORMULA DR-2580C Startup Manual page 17

I Rear
Document Eject Opening
Document ejected from here
when Straight Path is being used.
(See p. 51.)
Eject Selection Lever
Raise or lower this lever to switch the
document eject direction. (See p. 49.)
Up: Straight Path
Down: U-Turn Path
I Side (Interfaces)
Power Switch
This switch is used to
turn the scanner on.
(See p. 22 and p. 25.)
Note
Do not touch the connectors' pins or contacts. Doing so may damage the scanner.
Job Label Locations
Locations for affixing job
labels that describe
what is assigned to the
Job buttons.
(See p. 41.)
Kensington Slot
Used for anti-theft
measures.
Theft can be prevented
by attaching a chain,
etc.
Power Connector
Connect the bundled AC
adaptor. (See p. 21.)
Option Connector
Interface connector for connection of
the optional flatbed scanner unit.
USB Connector
Connect the USB cable provided or
one that supports Hi-Speed USB
2.0. (See p. 20.)
Before Using the Scanner
15