About These Instructions; Safety Instructions - Hornbach 10364547 Instructions For Fitting

Contents
1

About these instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Warnings and symbols used ......................... 5
2

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1 Qualified persons ........................................... 5
2.2 Intended use .................................................. 5
2.3 General safety instructions ............................ 5
3 Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1 Safety instructions ......................................... 6
4 Inspection and maintenance . . . . . . . . . . . . . . . . . . . . . . 6
4.1 Profile cylinder ............................................... 6
4.2 Door hinges ................................................... 6
5 Surface protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.1 Surfaces of the equipment housing ............... 6
6.2 Synthetic panes ............................................. 6
7 Dismantling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Dissemination as well as duplication of this document and the use and
communication of its content are prohibited unless explicitly permitted.
Noncompliance will result in damage compensation obligations. All
rights reserved in the event of patent, utility model or design model
registration. Subject to changes.
1 About these instructions
Read and follow these instructions carefully!
They provide you with important information on the
safe fitting, as well as proper care and maintenance,
of your equipment housing.
Keep these instructions in a safe place for later refe-
rence.
Enter the serial number (see the data label) here.
Serial no.: ............................................................
1 .1 Warnings and symbols used
Special safety information is provided at respective
important points in these instructions. They are identi-
fied by the following symbols and signal words.
The general warning symbol indicates a
danger that can lead to injury or death.
WARNING
Indicates a danger that can lead to death or serious
injuries.
ATTENTION
Indicates a danger that can lead to damage or
destruction of the product.
Important note for avoiding damage to pro-
perty
1 342 341 RE / 01.2021
Permissible arrangement or activity
Non-permissible arrangement or activity
See text section (e.g. section 2.2.1)
Check
Optional components
Remove / recycle the component /
packaging
2 Safety instructions
The manufacturer is not liable for damage resul-
ting from non-compliance with these instructions
including the safety instructions .
2 .1 Qualified persons
Have a qualified person (in acc. with § 2 para. 5
Industrial Safety Regulation) fit and maintain the door
following these instructions.
2 .2 Intended use
The equipment housing is suitable for storing garde-
ning equipment, bicycles and leisure items.
The equipment housing is neither suitable for the sto-
rage of hazardous substances nor for accommodating
people or animals.
2 .3 General safety instructions
• The qualified person must ensure that the respec-
tive national regulations regarding occupational
safety are complied with.
• Produce suitable foundations for the equipment
housing, according to our instructions, to guarantee
stability under wind load. Foundation dimensions
are min. 250 mm wide and 800 mm deep – stability
under a wind load of 150 km/h is only provided with
these foundations and with the door closed.
• Do not alter or remove any components! You could
otherwise risk putting important safety components
out of action. Only use original parts intended for
use with this particular equipment housing.
• Make sure there is sufficient water run-off in the
area of the bottom profile.
• Protect the equipment housing from aggressive and
caustic substances, such as acids, alkalis, road
salt, fertilisers or other chemical substances.
• Very high temperatures can be reached in the
equipment housing in summer, so make sure there
is sufficient ventilation.
ENGLISH
5