Scanning Film - Canon CanoScan 3000 Quick Start Manual

Scanning Film (for CanoScan 3000F only)

Scanning Film

The following steps explain how to scan the film with ArcSoft PhotoStudio.
1
Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5].
2
Click the Acquire icon
and select [Acquire].
ScanGear CS will start.
If an error message appears, click the [File] menu, choose
[Select Source], select your scanner model name and click the
[Select] button.
3
In the [Select source] category, select [Film].
4
In the [Type of original] category, select [Negative]
or [Positive].
In Simple mode, the settings for film scanning are pre-set so
that 35 mm film can be scanned and printed at the photo size
(8.9 x 12.7 cm/3.5 x 5 in.). The Output Resolution is pre-set to
300 dpi and the Scale to 400%.
• See the Scanning Guide, an HTML format
manual, and Precautions when Scanning
Film, an additional document, for
instructions for scanning film in the
Advanced mode.
5
Click [Preview].
ScanGear CS will display the preview image.
6
Click [Scan].
The scanner will start scanning the item.
When the scan is complete, click the ScanGear CS close box
)
( .
12
or click the [File] menu