Quick Start Guide Quick Start Guide Be sure to install the software programs before connecting the scanner to the computer! Setup and Scanning Check the Package Contents Install the Software Windows Macintosh Unlock the Scanning Unit Connect the Scanner Try Scanning...
• Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable with the ferrite core provided with the scanner is required to comply with Class B limits Subpart B of Part 15 of the FCC rules.
READ THIS GUIDE FIRST! Scanning Guide (HTML format manual) Refer to this guide when you have finished setting up the scanner according to the procedures in the Quick Start Guide. It describes how to utilize the scanner with the bundled software, and how to solve problems when they occur.
It also works with the scanner buttons. ArcSoft PhotoStudio (32 MB / 20 MB) - Image Editing Program It allows you to load images from the scanner, edit and retouch them, and apply special effects and enhancements. ScanSoft OmniPage SE (90 MB / 80 MB) - OCR (Optical Character Recognition) Program It converts characters scanned from a book, magazine or newspaper into text data for editing or digital transmission.
Install the Software (Windows) • With Windows XP/2000, you should log on with an administrator user name when you install or uninstall software programs. • If you are using a computer which does not equip USB 2.0 interface by standard, refer to P.15.
A message similar to the following may appear when you are using the scanner with Mac OS 9: “Would you like to look for the software on the Internet?” If it does, click the [Cancel] button to close it.
Unlock the Scanning Unit • Unlock the scanning unit before connecting the scanner to the computer. If it is left locked, a malfunction or other problem may occur. Peel the seals off the scanner. Gently turn the scanner over. Push the lock switch toward the unlock mark ( Lock Switch Return the scanner to a horizontal position.
• Only use the USB interface cable and the AC adapter provided with the scanner. Use of other cables or adapters may lead to a malfunction. • The scanner does not have a power switch. The power is activated as soon as the AC adapter is plugged in.
Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. Windows Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] and [PhotoStudio 5.5].
Click the Acquire icon [File] menu and select [Acquire]. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [OK] button. ScanGear CS will start. Macintosh or click the Mac OS X...
(Windows) or (Mac OS 9) in the PhotoStudio window to close • If the scanner does not perform as described above, read the "Troubleshooting" section of the Scanning Guide (HTML format manual). • For details about the bundled software programs, read the Scanning Guide or the User’s Guide (PDF format manual) for each software program on the CanoScan Setup Utility CD-ROM.
Using the Scanner Buttons You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the scanner before pressing a button.
Scanning Film (for CanoScan 3200F only) You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F. Positioning the Film Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish scanning, replace the protective sheet by aligning it with the grooves in the document cover and sliding it downward into place.
• The Film Guide has a calibration slot used by the scanner to calculate the color balance. The film cannot be scanned with the correct color balance if this slot is obstructed. Keep it clear.
Click the Acquire icon Click the Acquire icon • If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button for Windows or the [OK] button for Macintosh. Windows ScanGear CS will start.
(Windows) or (Mac OS 9) in the PhotoStudio window to close it. • If the scanner does not perform as described above, read the "Troubleshooting" section of the Scanning Guide (HTML format manual). • For details about the bundled software programs, read the Scanning Guide or the User’s Guide (PDF format manual) for each software program on the CanoScan Setup...
USB 2.0 expansion cards available on the market. Compatible USB Expansion Cards/Hubs Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility. Expansion Cards • Adaptec USB2connect 5100: PCI bus •...
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows XP with these programs still installed. After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 3.
This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a safe location.
Customer Care Center : 1-757-413-2848 http://www.usa.canon.com/consumer CANON CANADA INC. 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada 1-800-OK CANON http://www.canon.ca CANON LATIN AMERICA, INC. 703 Waterford Way, Suite 400 Miami, Florida 33126, U.S.A. CANON MEXICANA, S. de R.L. de C.V.