Maintenance; Recommended Maintenance Schedule(S) - Toro ProCore Processor Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 10 hours
Before each use or daily
Every 4 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 600 hours
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
Note: If you need a schematic, go to www.Toro.com and search for your machine from the Manuals link on the home page.
Maintenance Procedure
• Check the torque of the wheel nuts.
• Change the engine oil.
• Check the condition and tension of the belts.
• Check the torque of the wheel nuts.
• Check the engine oil level.
• Clean the engine screen and the oil cooler.
• Check the hydraulic lines and hoses.
• Check the chopper tips.
• Check the brush wear.
• Clean the brush/chopper housing.
• Inspect and clean the brush/chopper housings —Clean more often in high soil
moisture conditions.
• Grease the bearings and bushings.
• Check the condition and tension of the belts.
• Change the engine oil.
• Check the battery electrolyte level.
• Clean the engine.
• Check and/or replace the primary air filter.
• Replace the oil filter.
• Check the spark plugs.
• Replace the safety air filter.
• Replace the fuel filter.
32