Loading Envelopes - Canon PIXMA iP1700 Series Quick Start Manual

Loading Envelopes

Use either European DL or US Comm. Env. #10 size envelopes.
The address is automatically rotated and printed out.
Important • Do not use envelopes with embossed or treated surface, with a
double flap or pressure seals, with sticker flaps.
• Select either DL Env. (Windows) / DL Envelope (Macintosh) or Comm.
Env. #10 (Windows) / #10 Envelope (Macintosh) in the printer driver
according to the envelope size you are using.
• If you do not select Media Type correctly, the print out results in the
wrong way round.
(2) Slide the Paper Guide against the left side of
the envelope (next to the flap).
Note • When printing the envelope, set the Paper Thickness Lever to the
right.
• When using a special paper to inverse the print result on Windows,
open the Printer Properties dialog box and select the Rotate 180
degrees check box on the Page Setup tab.
(3) Select Envelope in Media Type, and then select DL Env. (Windows) / DL Envelope
(Macintosh) or Comm. Env. #10 (Windows) / #10 Envelope (Macintosh) in Page
Size.
(4) Select Portrait in Orientation.
For the printer driver setting, refer to
"Printing with Macintosh"
Fold the envelope flap.
"Printing with Windows"
on page 13.
Basic Printing
(1) Align the envelope
against the right side of
the Auto Sheet Feeder.
Set the envelope with its
flap facing down on the
left side.
A maximum of 10
envelopes can be loaded
at one time.
Printing direction
on page 11, or
7