Turning the Printer On and Off
Turn on the printer before printing.
Turning on the Printer
Note
If preparatory operations below are not complete, follow your setup sheet to complete them.
The Print Head and ink tanks are set into place.
The printer is connected to your computer (or a compatible device).
The printer driver is installed.
1
Open the Rear Tray Cover.
The Paper Output Slot Cover will open automatically.
2
Press the
Power
The Power lamp flashes green, and changes to
steady, non-flashing light.
Important
If you use the battery, make sure that it is charged.
For details, refer to the battery's instruction
manual.
If the Alarm lamp begins to flash orange, see
"Alarm Lamp Flashes Orange" on page 67.
3
Turn on your computer.
8
Before Using the Printer
button.