Canon PIXMA iP100 Series Quick Start Manual page 51

4
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head by aligning the
with the
(2) Press on the
the ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
Important
Install both ink tanks to print. The printer cannot be used unless both ink tanks are installed.
If the front (innermost) part of the ink tank (A) is sticking up, push down on the Canon logo on
the ink tank as illustrated below. Do not remove the ink tank forcibly.
mark on the ink tank
mark on the Print Head Holder.
mark on the ink tank until
(A)
Routine Maintenance
(1)
(2) (3)
47