Safety - YARDMAX YF1565 Operator's Manual

A
DANGER
UNDERSTAND YOUR MACHINE
Read this manual and all labels affixed to the machine to
understand limitations and potential hazards before attempting
to assemble this machine.
instructions on the machine and in the manuals before operation.
Become thoroughly familiar with the controls and their proper
operation. Know how to stop the machine and disengage the
controls quickly.
Make sure to read and understand all the instructions and safety
precautions as outlined in the Engine Manufacturer's manual
packed separately with your unit. Do not attempt to operate the
machine until you fully understand how to properly operate and
maintain the engine and how to avoid accidental injuries and/or
property damage.
Keep this manual and engine manual in a safe place for future and
regular reference.
If the unit is to be used by someone other than original purchaser
(or is loaned, rented, or sold), always provide this manual and any
needed safety training before operation. The user can prevent
and is responsible for accidents or injuries that may occur to
themselves, other people, and property.
This machine is not a toy, and is to be used only for its intended
purpose. Therefore, exercise extreme caution at all times. This
machine has been designed to perform one job: blow debris and
leaves from lawns, driveways, parking lots, etc. Do not use it for
any other purpose.
Do not force the machine. Use the correct machine for your
application. The correct machine will do the job more efficiently
and safely at the rate it was designed.
5
I

Safety

SAFETY
The definitions below give the level of severity for each signal word.
This symbol points out important
safety instructions. This machine
was built to be operated according
to the safe operation practices in
this manual. As with any type of
power equipment, carelessness or
error on that part of the operator
can result in serious injury. This
machine is capable of amputating
fingers, hands, toes and feet and
throwing foreign objects. Failure
to observe the safety instructions
could result in serious injury or
death.
GENERAL SJ!�FETY RULES
Read, understand, and follow all
This symbol points out safety
instructions. Read and follow all
A
WARNING instructions before attempting to
operate this machine. Failure to
comply with these instructions may
result in personal injury.
This symbol indicates a hazard,
A
CAUTION
which, if not avoided, may result in
minor or moderate injury.
� NOTE This information makes the product
easier to use.
PERSONAL SAFETY
Do not permit children to operate this machine at any time.
Keep children, pets, and other people not using the unit away
from the work area. Be alert and shut off the unit if anyone enters
work area. Keep children under the watchful care of a responsible
adult.
Do not operate the machine while under the influence of drugs,
alcohol, or any medication that could affect your ability to use it
properly.
Dress properly: Wear long, heavy pants, work boots, and work
gloves. Do not wear loose clothing, short pants, or jewelry of any
kind. Secure long hair so it is above shoulder level. Keep your
hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Protect eyes, face, and head from objects that may be thrown
from the unit. Always wear safety goggles or safety glasses with
side shields when operating.
Wear appropriate hearing protection.
Always keep hands and feet away from all moving parts during
operation. Moving parts can cut or crush body parts.
Always keep hands and feet away from all pinch points.
Do not touch parts that might be hot from operation. Allow parts
to cool before attempting to maintain, adjust, or service.
Stay alert, watch what you are doing, and use common sense
when operating the machine.
Do not overreach. Do not operate the machine while barefoot
or when wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces. Keep proper footing and
balance at all times. This enables better control of the machine in
unexpected situations.