YARDMAX YF1565 Operator's Manual page 11

UPPER HANDLE
There are two positions
� NOTE
the handle can be attached
position and a lower
Hook the upper handle tabs into the holes on the frame tube (See
Figure 5, illustration1).
Use the bottom hole for the lower handle
position. Use the middle hole for the high handle position.
Secure the handle on the frame tube with the carriage screws and
Figure 5, illustration2)
star knobs. (See
Figures
M8x45
THROTTLE CONTROL LEVER
in Mount the throttle control lever onto the right upper handle with
which
a high
- M5x25 screw and lock nut. Tighten securely using a 8mm wrench
position.
and a Phillips screwdriver.
Secure the throttle control cable on the handle with cable clamp.
Figure
(See
x2
Walk-Behind Blower
6)
Figure6
Operator's Manual
»
Assembly I 10