YARDMAX YF1565 Operator's Manual page 15

Throttle Control Lever
Regulates the speed of engine. Moving
FAST9
towards to speed up the engine.
))
Moving towards LOW-A to lower the engine
speed.
Flow Angle Adjustment Control Lever
)) Adjusts the direction of air flow between 7 positions.
Fan Housing
Contains the fan.
))
Intake Guard
Prevents fingers, hands, or large debris from entering
))
the fan housing and contacting the fan blades.
Front Swivel Caster
360 degree swiveling caster to allow for
))
maneuverability.
Discharge Chute
Directs air flow to the left side of the unit from
))
machine operator's position.
Front Discharge Chute
)) Redirects the air flow toward the front of the unit.
Walk-Behind Blower
Flow Angle Adjustment Index Lever
Transits the movement from control lever to the air
))
flow louver.
Recoil Starter Handle
)) Used to pull-start the engine.
Choke Control
The choke control is used to choke the carburetor
and assist in starting the
slides between the CHOKE and RUN positions. The
))
CHOKE position enriches the fuel mixture for starting
a cold engine.
The RUN position provides the correct fuel mixture
))
for operation after starting, and for restarting a warm
engine.
Fuel Valve Lever
The fuel valve opens and closes the passage between
))
the fuel tank and the carburetor.
The fuel valve lever must be in the ON position for the
))
engine to run.
When the engine is not in use, leave the fuel valve
))
lever in the OFF position to prevent carburetor
flooding and to reduce the possibility of fuel leakage.
» Operator's Manual
engine. The choke control is
Know Your Machine I
14