Canon Laser Shot LBP5000 Getting Started Manual page 9

•
Be sure to hold the printer from the front side when carrying it. If you
hold the printer from the rear side, you may get off-balanced and
drop the printer, resulting in personal injury.
IMPORTANT
When taking out the printer, secure sufficient space around the printer.
3
Put the printer down carefully at the installation site.
CAUTION
Put the printer down slowly and carefully. Be careful not to hurt your
hands.
4
Set the paper cassette in the printer.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
Removing the Packing Materials
This printer is provided with packing materials to be protected from excessive
vibrations and shocks during delivery. Remove the packing materials after the
printer is carried to the installation site.
IMPORTANT
•
If there is any packing material remaining inside the printer, this may result
in poor print quality or damage to the printer when operating the printer. Be
sure to remove all the packing materials following the procedure.
•
The removed packing materials are required when transporting the printer
for relocation or maintenance. Keep them where they will not get lost.
NOTE
The packing materials may be changed in form or position to be placed, or
may be added or removed without notice.
1
Open the front cover.
Holding the opening of the front cover, open it gently.
Step
1
9