Canon Laser Shot LBP5000 Getting Started Manual page 44

3
When installing the printer unit on the paper feeder, gently
set it down so that each surface of the printer unit is flush
with the front or side surfaces of the paper feeder.
Also, match the positioning pins (A) and connector (B) when setting the printer
unit.
IMPORTANT
If the printer unit cannot be placed on the paper feeder properly, lift the
printer unit once, hold it horizontally, and place it again. If you try to set the
Step
printer unit forcefully without lifting it, the connector and positioning pins
6
may be broken.
44
(A)
(B)
(A)
4
Attach the cassette protective cover to the printer unit and
paper feeder.
Install the left side of the cassette protective cover
pressing the right side of the cover
c
as shown in the figure.
a
IMPORTANT
Do not put hands, press hard, or place objects on the cassette protective
cover. It may damage to the cassette protective cover.
5
Set the paper cassette in the printer unit and paper feeder.
6
Open the output tray.
7
Connect the interface cables except for the USB cable, and
connect the power cord.
8
Plug the power plug into the AC power outlet.
a
on the printer, then while
b
, insert the cover into the back of the printer
c
b