Canon Laser Shot LBP5000 Getting Started Manual page 25

Connecting the Printer
to a Computer and
Step5
Installing the CAPT
Software
This section describes the procedure for connecting the printer to a
computer with a USB cable and installing the printer driver and the USB
class driver.
The appropriate USB interface varies depending on the operating system
of the connected computer as follows.
G Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
G Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed
(USB1.1 equivalent)
For details on using this printer in a network environment, see the
following directions.
G Installing the Network Board
See Installing the Network Board: p. 45
G Installing the CAPT Software
See "Chapter 2 Setting Up the Network Environment for Printing" in
Guide
WARNING
When plugging or unplugging the USB cable when the power plug is
plugged in an AC power outlet, do not touch the metal part of the
connector, as this may result in electrical shock.
IMPORTANT
•
Do not plug or unplug the USB cable while the computer and printer are
ON, as this may result in damage to the printer.
•
This printer uses bi-directional communications while printing. Connecting
to print servers, USB hubs or switching devices that requires uni-
directional communication may result in printer error.
•
If you are using Windows 2000/XP/Server 2003, be sure to log on as a
member of Administrators when starting up.
•
Although a sheet of blank paper is output when you turn the power ON for
the first time after you install the printer, this is not an error.
NOTE
•
The screen shots used in this section are from Windows XP Professional.
•
A USB cable is only supplied with 220 - 240 V model for countries and
regions of Asia. In other countries and regions, prepare according to the
specifications of your computer. Use a USB cable with the following
symbol.
1
Make sure that the printer and computer are OFF.
Network
CD-ROM
Step
5
25