Attaching The Cd-R Tray - Canon i9950 Print Manual

Attaching the CD-R Tray

Setting up the paper output tray
Paper Output Tray
Extension
CD-R Tray Lever
Side View
Paper printing position
Do not change the position of the paper output tray with the CD-R tray lever while printing.
1 1 1 1
Open the paper output tray if it is
closed, and be sure the paper output
Guide
tray extension is completely pushed in,
Roller
and not extended at all.
The tray clicks in place and the right side guide
roller pops up when you push the paper output tray
extension back completely.
2 2 2 2
Pull the CD-R tray lever slowly to the
bottom.
The paper output tray lifts up to the CD-R printing
position.
The paper output tray flaps up and down once when
lifting up to the CD-R printing position.
3 3 3 3
Release the CD-R tray lever after the
paper output tray settles into the CD-R
printing position.
The lever will move back to the initial position.
CD-R printing position
3