Cd-R Printing Errors Displayed In Macintosh - Canon i9950 Print Manual

CD-R Printing Errors Displayed in Macintosh

Problem Possible Cause
Macintosh CD-R tray is not in
"Error No: 1001" place
Macintosh CD-R/DVD-R is not
"Error No: 1002" recognized correctly
Macintosh CD-R/DVD-R is not in
"Error No: 1002" place
Macintosh CD-R tray is jammed
"Error No: 1302"
Macintosh The paper output tray
"Error No: 1850" is not in the CD-R
printing position
Macintosh Paper output tray is not
"Error No: 1851" in the paper printing
position
Macintosh Paper output tray is
"Error No: 1855" pulled down during
printing
Macintosh Paper output tray is
"Error No: 1856" raised during printing
Ensure that the CD-R tray supplied with this printer ("A" is
on the upper side) is in place.
Correctly attach the CD-R tray or load CD-R/DVD-R, and
press the RESUME/CANCEL button.
Some CD-Rs/DVD-Rs are not recognized correctly. If this
happens, click Detects a printable disc on the CD-R tray at
Custom Setting on BJ Printer Utility to clear the check
box, and print.
When printing is over, select the Detects a printable disc on
the CD-R tray check box.
If the check box is cleared, printing may begin without the
CD-R/DVD-R loaded. Selecting the check box prevents the
CD-R tray from being falsely printed.
Correctly place the CD-R/DVD-R on the CD-R tray, and
attach the CD-R tray again, and then press the RESUME/
CANCEL button.
Perform the following operations.
1. Gently pull out the CD-R tray.
If the CD-R tray cannot be pulled out, press the POWER
button to turn off the printer, then turn on the printer
again. The CD-R tray will automatically be ejected.
2. Place the CD-R tray again, and press the RESUME/
CANCEL button. Be careful not to move the paper
output tray.
When placing the CD-R tray, refer to "Attaching the CD-R
Tray" on page 3 for proper placing of a CD-R, or DVD-R
on the CD-R tray.
Lift up the paper output tray to the CD-R printing position by
pulling the CD-R tray lever slowly down to the bottom, and
press the RESUME/CANCEL button.
Pull the paper output tray down to the paper printing position
by pulling up the tray slowly, and press the RESUME/
CANCEL button.
Lift up the paper output tray to the CD-R printing position,
and press the RESUME/CANCEL button to cancel printing.
Then print again.
See "Attaching the CD-R Tray" on page 3
Pull the paper output tray down to the paper printing position,
press the RESUME/CANCEL button to cancel printing,
then print again. See "Removing the CD-R Tray" on page 6
Try This
15