Printing Area - Canon i9950 Print Manual

The POWER Lamp Flashes Orange
When a printer error occurs, the POWER lamp flashes. The number of flashes indicates the type of error.
Count the flashes and take the appropriate action to correct the error.
This section deals with errors on the CD-R tray only. For other errors, refer to the User's Guide.
Number of
flashes
Two flashes
Six flashes
Seven flashes

Printing Area

CD-R (12cm/8cm), DVD-R
1.0 mm
1.0 mm
16
Possible Cause
CD-R tray is not in
place
Paper output tray is not
appropriately
positioned
CD-R or DVD-R not
set
CD-R (12cm/8cm), DVD-R, the printing area of the both
1.0 mm 1.0 mm
media is within the limits which are 1 millimeter away from
the internal & external diameters of the label.
Verify the following items, then press the RESUME/
CANCEL button:
-The CD-R tray supplied with this printer ("A" is on the
upper side) is used.
-A CD-R/DVD-R is in place.
-The CD-R tray is inserted properly.
To print on a CD-R/DVD-R, lift up the paper output tray to the
CD-R printing position, and press the RESUME/CANCEL
button.
To print on paper rather than a CD-R/DVD-R, pull the paper
output tray down to the paper printing position.
Ensure that the CD-R or DVD-R is set on the CD-R tray
properly. Reinstall the CD-R tray and press the RESUME/
CANCEL button.
Try This