Canon i70 Series Start Here page 2

6
Install the Printer Driver (Windows
1
Be sure that the printer is off, then turn on
your computer.
POWER POWER
Lamp off
Button
®
NOTE: For Windows XP or Windows 2000,
before continuing.
IMPORTANT: If you see the Add New
Hardware Wizard, click Cancel.
2
Close any open software applications,
then insert the "Setup Software
& User's Guide" CD-ROM. The setup
NOTE: If the setup program does not run
Start, then Run,
then type D:/msetup.exe, where D is
your CD-ROM drive.
3 Read the License Agreement, then click Yes.
4 When the main menu appears, click
Install.
®
)
5 When the Printer Port window appears,
TURN THE PRINTER ON. The software
will begin identifying the printer port
being used.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the
i70 Quick Start Guide for instructions.
When the driver installation is complete,
6
click Finish.
7 Register your product to ensure product
support. Follow the on-screen instructions.
NOTE: Be sure to register your product. The
printer.
Serial #
Location
8 When the software menu appears,
click Install.
IMPORTANT: To ensure highest quality
output, continue with Step 7 Align the
Print Head.
6
Install the Printer Driver (Macintosh
NOTE: If you are using Mac OS 8.6 to 9.x,
please refer to your Quick Start guide for
installation instructions.
1
Turn on your Mac and your printer and insert
the "Setup Software & User's Guide"
CD-ROM.
Open the Mac OS X folder, then double-click
2
the Printer Driver folder.
3 Double-click the i70 icon.
NOTE: For v10.2 users, skip to Step 5.
4 Cli
then click OK.
5
When the "Welcome to the BJ printer
installer" screen appears, click Continue.
6 Read the Software License Agreement
and click Continue, then click Agree.
®
)
7 Select a destination for the printer driver
to be installed. Then click Continue.
8 Click Install. When a message asking for
your confirmation to proceed with the
installation, click Continue Installation.
When the message "The software was
9
" appears, click
Restart.
10 0 Access your CD-ROM again. From the
Application folder, double-click on the
software to be installed.
Follow the on-screen instructions. When the
11
"Installation is Complete" screen appears,
click OK.
NOTE: Be sure to register your product. The
printer.
Serial #
Location
IMPORTANT: To ensure highest quality
output, continue with Step 7 Align the
Print Head.
7
Align the Print Head
Before using the printer, align the print head
to ensure the best quality printing.
1
Load a stack of blank paper in the
paper rest.
2
Start the alignment procedure.
Windows:
a. For Windows XP select Start, then
Control Panel. Then click on Printers
and Other Hardware, then Printers
and Faxes.
b. Right-click the Canon 70 icon,
then click .
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d
alignment, click OK.
e. Follow the on-screen instructions
to complete print head alignment.
Macintosh OS X:
a. Double-click the Macintosh HD icon,
then folder. Double-click
the Utilities folder, then the Print Center
icon. The Printer List window appears.
Under Printers menu, select Configure
Printer. Select i70, and click Select.
b. Click the down-arrow to select Test
Print.
c. Click the Print Head Alignment icon.
3 Follow the on-screen instructions.
4 Click OK (Windows) or Send (Macintosh)
when finished.
40-42380-0902
Part no. QA7-2532-V01
©2002 Canon U.S.A., Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN VIETNAM