Safety Information - Canon BJC-S9000 Quick Start Manual

Appendix

Safety Information

Warnings and Cautions
This guide uses the following icons to indicate situations that could cause damage or injury:
Read and follow all of these cautions and warnings to ensure the safe use of the printer. To avoid the hazards of
fire, personal injury, or damage to the printer, never attempt to use the printer in any way other than the
methods described in this guide.
Choosing a Location
• Never set the printer on a surface that is unstable or subject to excessive vibration. The printer could tip or fall
and cause injury.
• Never use the printer in a location that is subject to high humidity, dust, high temperatures, or direct
sunlight.
• Set up and use the printer in a location where ambient temperature is within 41°F–95°F (5°C–35°C) and
10%–90% humidity with no condensation.
• Always carry the printer with both hands holding both ends of the printer. To avoid dropping the printer and
causing injury, always carry it carefully when moving it to another location.
Power Supply
• Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a fire or
electric shock.
• Never use the printer if the power cord is bundled or knotted. To prevent the hazards of fire or electric shock,
make sure the power cord is straight.
50
Always follow the instructions provided in Warnings to prevent potential or serious personal
injury or death as a result of careless operation of the equipment.
Always follow the instructions provided in Cautions to prevent minor injuries to yourself or
damage to the equipment as a result of careless operation of the equipment.
Never place the printer near flammable solvents such as alcohol or thinner. To avoid the
hazards of fire or electric shock, keep all flammable liquids away from the printer.
Never place the printer on a thick carpet or rug. Fibers or dust entering the printer could cause
a fire.
Keep the power outlet for the printer free of all obstacles so you can unplug the power cord at
any time. Such obstacles could prevent you from unplugging the printer when a printer fault
occurs and cause a fire or electric shock. The socket-outlet should be installed near the
equipment and should be easily accessible.
Never attempt to plug the power cord into a power outlet when your hands are wet. To avoid
electric shock, make sure that your hands are dry.
Never cut, modify, stretch, bend, or twist the power cord, and never place heavy objects on the
power cord. A power leak from a damaged power cord could cause a fire or electric shock.
Never plug the printer power cord into a power outlet (power board, double adapter, etc.) that
is shared by other devices or office equipment. To prevent the hazards of fire or electric shock,
avoid overloading power points.
If you detect smoke, unusual odors, or strange noises around the printer, immediately press
the POWER button to turn off the printer and disconnect the power plug. To avoid fire or electric
shock, never use the printer under these conditions. Call the Customer Care Center.