Replacing Ink Tanks - Canon BJC-S9000 Quick Start Manual

Printing Maintenance
1.
Click Chooser on the Apple menu.
2.
Ensure the S9000 is the selected
printer.
3.
Set Backgrounding to On, then close
the Chooser.
4.
After starting a print job, click the
Application menu in the upper
right corner of the screen, then click
BJ PrintMonitor. The BJ Print Monitor
will open. This dialog box displays the
ink levels.

Replacing Ink Tanks

To replace an empty ink tank:
1.
With the printer on, open the front cover. The printhead holder will
automatically move to the center.
2.
Press the tab on the front of the empty ink tank, then remove and discard the
empty tank.
3.
Remove the new ink tank from its package. Pull the orange tape up, remove
the wrapper and twist off the orange protective cap.
4.
Holding the new ink tank at a slight angle, align it with the correct color slot,
then gently insert it.
5.
Press down on the ink tank until it clicks into place.
6.
Close the front cover.
22
To avoid spilling ink, never press on the sides of an
ink tank.
Do not force an ink tank into the printhead. If the ink tank does
not go in smoothly, realign it, then try again.