Basic Printing - Canon BJC-S9000 Quick Start Manual

Basic Printing

The S9000 photo printer can print on paper
ranging from standard copier paper (usually
17–28 lb.) to Canon specialty media paper and
envelopes.
The paper thickness lever is located inside the
front cover, on the printhead holder. It controls
the paper feed for the type and weight of the
media on which you are printing.
Use the chart on the previous page to ensure
that the paper thickness lever is set correctly for
the type of Canon media you are using.
To load plain paper:
1.
Make sure the paper thickness lever is set to the left.
2.
Pinch and slide the paper guide to the left.
3.
Fan the edges of the sheets to remove static cling and avoid paper jams, then
tap the edges of the stack against a flat surface so the stack is aligned.
4.
Insert the paper into the paper rest.
5.
Slide the paper guide right to the edge of the paper until firmly in place.
To load Canon specialty media:
Make sure the paper thickness lever is set correctly for the media used. (See
"Load Limit and Paper Thickness Lever Position" on page 5.)
1.
Pinch and slide the paper guide to the left.
2.
With the print side facing up, insert the media into the paper rest with the
right edge aligned to the right side of the sheet feeder.
3.
Slide the paper guide right to the edge of the media until firmly in place.
6
Some specialty media have specific sides for printing. The print
side is usually the brighter white or glossier side of the page.
When using specialty media, ensure that the brighter/glossier
side faces up and avoid touching the print side.
Always follow the specific media instructions packaged with
your media for complete details and ink drying times.
Print side
Load limit mark