Table of Contents
Advertisement
Quick Links
OPERATING MANUAL
Electronic stand scale
Stand scale – ESW10 series
(ESW10-200206-Rev007-UM-de)
ADE Germany GmbH & Co. KG
Hammer Steindamm 27-29
22089 Hamburg, GERMANY
+49 40 432 776 - 0
Fax
+49 40 432 776 - 10
Email: info@ade-germany.de
OPERATING MANUAL
READ BEFORE USE
PLEASE KEEP FOR FUTURE REFERENCE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ADE ESW10 Series
Summary of Contents for ADE ESW10 Series
- Page 1 OPERATING MANUAL Electronic stand scale Stand scale – ESW10 series (ESW10-200206-Rev007-UM-de) ADE Germany GmbH & Co. KG Hammer Steindamm 27-29 22089 Hamburg, GERMANY +49 40 432 776 - 0 +49 40 432 776 - 10 Email: info@ade-germany.de OPERATING MANUAL...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ......................1 About this operating manual ..................2 General information ....................2 Storage ........................2 Target group ....................... 2 Safety instructions ......................2 Intended use ........................3 Scope of delivery......................3 START-UP ........................4 Battery operation...................... -
Page 3: About This Operating Manual
About this operating manual General information - This operating manual describes the safe operation as well as the operation, care and maintenance of the scale. - Only compliance with the operating manual is considered intended use. - Please read this operating manual carefully before connecting and using the scale. Failure to observe this operating manual may result in injuries or damage to your product. -
Page 4: Intended Use
In such cases, please contact authorised customer support. Intended use Your ADE ESW10 floor scale is a high-quality product and was manufactured for use as a non- automatic scale. The scale is ideal as a precise, fast and versatile multi-purpose scale with various counting and control functions. -
Page 5: Start-Up
START-UP 1. Carefully remove the delivery contents from the packaging. 2. Remove the marked transport lock on the underside of the scale by unscrewing the screw. Keep the transport lock carefully for later transport. 3. The stand bracket is first attached to the base using the four supplied bolts before the stand is connected to the base with the bracket. -
Page 6: Operating And Display Elements
Operating and display elements Operating elements Except for the on and off key, all keys have two different functions: One in weighing mode and one in menu setting mode. Symbol Description Function On and off key ON/OFF The scale is switched on by pressing this key. The scale is switched off again by pressing this key again. -
Page 7: Display Symbols
Display symbols Symbol Meaning Display for stable weight measurement. “GROSS” Display for gross weight. “TARE” Display for activated tare function. “ZERO” Display for zeroing. Low battery indicator. Battery status indicator “Charging” green Battery fully charged. yellow Battery is charging. Battery almost discharged. Operation during weighing processes Zeroing the scale The scale is equipped with an automatic zero compensation for minimal deviations or residues... -
Page 8: Counting Programme
Counting programme If containers are used, they must be tared beforehand in weighing mode. Place the reference piece count of the pieces to be counted on the scale. While the scale is displaying the weight, pressing the key activates the counting programme, at which point the scale displays “P 10”... -
Page 9: Additional Weighings
Settings Setting and saving the limit values After pressing the key, the display shows “F0 H-L”. Confirm this by pressing the key. Press the key to select “SET HI” (for the maximum value) or “SET LO” (for the minimum value) and confirm this with the key. -
Page 10: Parameters
10. Parameters The scale has six parameters that can be set by the user: Setting limit values for weight control Functions for memory content of the additional weighings Presetting weight units Setting the date function Setting the time function ... -
Page 11: Menu Settings
11. Menu settings Sub- Function Descriptions Display function SEt Lo Sets the lower limit value. 000.000 F0 H-L SEt HI Sets the upper limit value. 000.000 Deletes the memory content of additional weighings without printing to CLr the result. F1 toL to P-C Prints the memory content of weighings and then deletes them. -
Page 12: Rs232 Data Interface
12. RS232 data interface The ESW10 scale is equipped with an RS232 interface. Specifications: RS232 output ASCII code 8 data bits No parity Connector: 25-pin D-subminiature socket Pin2: Output Pin3: Entry, not used here Pin5: Signal base The data formats for normal weighing operations, counting programme and retrieval of stored values differ from each other, such as Normal output: 12.340 kg... -
Page 13: Care And Maintenance
13. Care and maintenance Cleaning Disconnect the mains plug before cleaning the scale. Use only a damp cloth or an ordinary disinfectant for cleaning. Do not use aggressive liquid cleaning agents, abrasive or acidic detergents or white spirit. Make sure that no liquid cleaning agent or water penetrates the scale and always follow the manufacturer's instructions for use. -
Page 14: Storage And Transport Conditions
Error messages Failure Description Remedy Remove the weight from the scale. - - - - - Overload If the problem persists, contact your dealer. Enter the date with correct and logical values in the Err 1 Incorrect date entry format yy:mm:dd. Enter the time with correct and logical values in the Err 2 Incorrect time entry... -
Page 15: Warranty
Warranty ADE will repair or replace this product if evidence is provided that it has failed within 1 year from the date of sale (proof of purchase is required) due to lack of workmanship or defective material. All moving parts, such as batteries, cables, etc. are excluded. -
Page 16: Declaration Of Conformity
RoHS Directive 2011/65/EC in their respectively applicable versions. This declaration will lose its validity if any modification is made to the scale without our consent. Hamburg, January 2020 ADE Germany GmbH & Co. KG Hammer Steindamm 27-29 D-22089 Hamburg Manufacturer: ADE Germany GmbH &... - Page 17 ESW10-200206-Rev007-UM-en...
- Page 18 Distributor: ESW10-200206-Rev007-UM-en...
Need help?
Do you have a question about the ESW10 Series and is the answer not in the manual?
Questions and answers