Whirlpool GOA 6423NB Instruction Manual page 22

• The electrical installation of this product
should be performed only by authorized
service Whirlpool or by a trained technician
of your trust.
• Read technical instructions before installing
your gas appliance.
• Read use instructions before turning on
your gas appliance.
• This gas appliance must be installed only
by qualified professional.
• Adaptation to use another type of gas
must be made either by a qualified
technician, by the gas supplier or by a
manufacturer's representative.
• Disconnect the electrical supply before
servicing the cooktop.
• Replace all components before turning the
appliance on.
• Do not remove grounding wire.
• Connect grounding wire to an effective
ground.
• Do not use an adapter or T.
• Do not use an extension cord.
• Always use certified hoses and pressure
regulators.
• Check expiration date of hoses, hose and
pressure regulators and replace them if
necessary.
• Properly secure and tighten all gas
connections during installation.
• Install appliance according to the
instructions described in this instructions
manual.
• Installation and maintenance must be
performed by a qualified technician,
following the manufacturer's instructions
and in compliance with current local safety
Manual W10777748.indd 22 Manual W10777748.indd 22
regulations. Do neither repair nor replace
any part of the appliance unless
specifically recommended in this manual.
• Failure to follow these instructions can
result in fire, explosion, electrical shock or
death.
What to do if you smell gas:
• Close the shut-off valve.
• Do not try to light any electrical appliance.
• Do not touch any electrical switch.
• Do not use any phone in the environment.
• Immediately call your gas supplier; use
your neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.
Important:
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this appliance.
The electrical and gas connections
must comply with local regulations.
• When installing the cooktop, provide a
circuit breaker which must have a
minimum gap of 3 mm among contacts.
• Regulations require that the appliance is
grounded.
• The power supply cord must be long
enough to connect the appliance to the
main power supply when it is built in.
• Only use flexible or rigid metal hoses for
gas connection.
• If necessary, the power supply cord must
be replaced exclusively with a power
supply cord having identical
characteristics to the original supplied by
22
02/09/15 09:23 02/09/15 09:23