Additional Information - Nice Infinity Shock G2 Instructions And Warnings For Installation And Use

ATTENTION:
In the above example the LED will indicate
when the electrifier is armed.
15

ADDITIONAL INFORMATION

- Exclusive industrial-use electrifier, not conceived for residential use.
- Before accessing the terminals, all supply circuits should be turned off.
- Read and follow all instructions in this manual before installing and/or
using this equipment.
- Never install the electrifier, cables or electrified fence in locations where
there are particularly hazardous conditions, e.g. in the presence of
corrosive agents, explosive atmosphere (with the presence of gases),
flammable liquids, etc.
- The fixed wiring for the 127 - 220 Vac supply of the equipment should
have a safety switch or a similar device, such as a breaker. Such device
should enable a power grid shutdown without the need to open the
equipment's cabinet, in addition to protecting the installation against
eventual short-circuits in the supply input.
Electrifier connectors
S
1k resistor
Anode
Cathode
55
ENGLISH_