Nice Infinity Shock G2 Instructions And Warnings For Installation And Use page 56

- This equipment should be attached to a rigid wall or similar
construction, in vertical position, in a way that the user cannot
change its positioning without the assistance of tools. Do not
install the central on wooden surfaces or materials that favor
flame propagation in case of a wiring or equipment short.
- Use only 12-volt rechargeable batteries, preferably the gel-seal type,
with 12 Vdc / 7 Ah and with a fluctuation voltage ("stand-by use") of 13.5
~ 13.8 Vdc.
- This equipment should never be opened, programmed or handled by
the end user. Whenever there is need for repair, reseting or installation, a
specialized technician should be hired.
- Installation and securing procedure for cables and accessories,
minimum fence height and distance between the warning signs are
Genno's recommendations, based on our market experience as a
manufacturer. These guidelines should be followed whenever possible. If
there are any local laws that regulate this type of installation, they should
be fully observed.
- Follow the recommendations of this manual in regard to the installation
procedures and materials to be used while installing.
- In the case of a defect or malfunction, contact our support department.
- Inform the system user about the functioning and the risk level of the
electrified fence and the precautions he should have while handling it.
- Request the user to allow the installing company, whenever they
deem necessary, to access their equipment and the components of the
electrified fence for periodical technical revisions.
56
_ENGLISH