Light Signal Via Led - Nice Infinity Shock G2 Instructions And Warnings For Installation And Use

3

LIGHT SIGNAL VIA LED

FUNCTION LED
Flashes whenever the shock returns to
the central indicating that the fence is not
broken nor grounded. If the shock is
PULSO LED
activated, and the PULSE led does not
flash, it indicates that the fence wiring is
broken or grounded and the system will
trigger the siren.
On: Indicates that the central is being
REDE LED
supplied by the power grid.
On: Indicates that the central is being
BATERIA LED
supplied by the battery.
On: Indicates that the shock is enabled
Off: Indicates that the shock is disabled
CERCA LED
Flashing: indicates that the fence has
been violated and the siren output has
been triggered.
Off: Zone disabled
ZONA LED
On: Zone enabled
Flashing: Zone violated (trigger memory).
45
ENGLISH_