Setting Up The Remote Control; Setting Up - Siren Time - Nice Infinity Shock G2 Instructions And Warnings For Installation And Use

9

SETTING UP THE REMOTE CONTROL

In order to set the remote control, follow the steps below:
1) Press the CH PROG key once;
2) The LED PROG lights up and the siren generates 1 beep;
3) Press for 1 second the control button that you wish to set;
4) The LED PROG flashes, indicating success in registering the pressed
button. pressionado.
* To set new controls, repeat the steps above.
Reseting the Controls
Press for 7 seconds until the LED PROG stops flashing, the electrifier will
delete all remote controls settings.
10

SETTING UP - SIREN TIME

Locate the TEMPO DE SIRENE jumper and position it according to the
desired configuration. The instructions are also registered on the product
board.
Setting for 15 Setting for 2 Setting for 5
seconds minutes minutes
50
_ENGLISH