Advertisement
2. If an equalisation charge has been programmed (vented
battery), it will start automatically. Alternatively, an
equalisation charge can be triggered manually; go to
section End of charge with equalisation .
3. Press the central button or disconnect the battery that is
now ready for use.
End of charge with equalisation
Equalisation only applies to vented batteries. Start can be
manual or automatic.
Manual start
1. At the end of charge (green display light on), press
the key
.
The start of the equalisation charge is indicated by the
message EQUAL. During the equalisation charge, the
charger displays the current (ref 4) and alternating, the
battery voltage, voltage per cell, remaining time (ref 2).
2. The battery will be available as soon as the screen
becomes green.
Automatic start
If the equalisation charge has been programmed
( Configuration/Equalisation menu), the equalisation charge
is initiated automatically.
If the battery remains connected, and in order to maintain it
in a fully charged condition, refresh charges followed by an
equalisation charge will be automatically initiated according
to the battery technology. Similar indications to those
displayed in manual start (see above) are displayed.
Advertisement
