Print Job Will Not Start - Canon Color Bubble Jet BJC-1000 Series User Manual

Cause
Installed printer driver
not operating correctly

Print Job Will Not Start

Cause
The power cord is
disconnected from the
power outlet
No power is coming
from the power outlet
The printer and the
computer are not
properly connected
with the printer cable
A large-sized document,
such as a photograph or
graphics, is being printed
The printer driver being
used is not the BJC-1000
printer driver
The printer port is not
set correctly
The computer printer
port is set to ECP
Chapter 5
Solution
Reinstall the printer driver
Remove the installed BJ printer driver and then install the
printer driver again.
To uninstall the printer driver, click Start and select
Programs. Then select BJ Printer and click Uninstall.
Follow the on-screen instructions.
Solution
Check your power cord
Check that the power cord is securely connected
to the power outlet.
Check the outlet
Check that power is coming from the power outlet.
Check your cables
Connect the power cord and the printer cable securely.
For details, see the Quick Start Guide.
Wait awhile until printing starts
Data transfer takes longer with large-sized documents.
Make sure the BJC-1000 driver is selected
Check the printer name in the Print dialog box of the
application software, and select BJC-1000.
Check the port setting
If the printer and the computer are connected directly
with a cable, set the "Print to following port:" setting in
the printer driver setup screen to LPT1.
Check the ECP setting
Delete the computer ECP mode and try printing again.
Troubleshooting 5-9