Connect The Telephone Line - Canon PIXMA MX330 Getting Started Manual

3

Connect the Telephone Line

To use the machine as a fax, a telephone
line needs to be connected.
This section describes the basic method of
telephone line connection.
For other connection methods, refer to the on-
screen manual: Basic Guide.
Go to "4 Turn
When not using
the Power On"
as a fax:
on page 4.
When using as
both a fax and
telephone:
When using as
a fax only:
• If you cannot send faxes after installing the
machine, check the telephone line type. For
details, refer to "Confirming the Telephone Line
Connection" in the on-screen manual: Basic
Guide.
1
Connect the machine with a telephone line using the
supplied telephone line cable (A).
When using as a fax only:
Go to "4 Turn the Power On" on page 4.
only
1
2
A
Remove the telephone connector cap (B), then
connect a telephone with the telephone line
cable.
• Do not connect the machine and a telephone in parallel
to the same telephone line using a distribution adapter.
The machine may not operate properly.
3
2 4 5 6 7
Only when connecting a telephone:
B
8