Brother 884-T05 Operation Manual page 160

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
Memo
● For details on large-size embroidery
patterns, refer to "Sewing Large-size (Split)
Embroidery Patterns" on page 214.
• To add a pattern from the computer, repeat
1
step .
The following screen appears while data is
written to the embroidery machine, and
the key for that pattern appears when
writing is finished.
1
1 Added patterns
158
4 Touch .
This confirms the pattern selection.
The pattern editing screen appears.
Note
● The pattern recalled from the computer is
only temporarily written to the machine. It
is erased from the machine when the
machine is turned off. If you wish to keep
the pattern, store it in the machine. (Refer
to "Machine's memory" on page 187.)
■ If the desired pattern cannot be recalled
When recalling pattern data from the computer,
the data is not taken directly from the computer.
Instead, the pattern data is temporarily written to
the machine, and that written pattern data is
recalled. A total of about 3 MB of embroidery
patterns can be saved in the "Removable Disk".
Pattern data cannot be recalled if that data
amount is exceeded.
1 Shows the amount of free space in the USB area
of the machine. If pattern data with this size is
added, it can be recalled (temporarily written).
To recall a pattern larger than the amount of
space available, delete any currently written
patterns, and then place the pattern that you
wish to recall into the folder.
1