Canon MultiPASS F30 Quick Start Manual page 5

Canon multipass f30: quick start

Hide thumbs Also See for MultiPASS F30:

Step 5: Install the Ink Tanks

1. Pull the orange tab off the yellow ink tank (BCI-3eY), then remove and discard the plastic

wrapper.

2. Twist off and discard the orange protective cap.

NOTE: To avoid spilling ink, never press on the sides of the ink tank.

3. Insert the ink tank into the correct slot (refer to the color guide on the printhead).

Press down gently until the ink tank locks into place.

4. Insert the remaining three ink tanks into their assigned slots.

5. Press the scanning unit closed until it clicks.

Step 6: Align the Printhead

1. Place a stack of paper in the multi-purpose tray in preparation for printhead alignment.