Scanning From A Windows Application - Canon MultiPASS C50 Software User's Manual

3. In the ScanGear window, specify the following preview scan options
for your document as needed: Scan Mode, Scan Resolution,
Preferences, Page Size, and Black and White Options (if applicable).
4. Click Preview.
5. Review the display of your scanned preview image in the scan
window. Adjust the properties of your image as needed for the final
scan.
6. Replace your document in the document feeder of the C50.
7. Click Scan.
An indicator displays to track the progress of the scan. A scanned
document remains in the Scan folder until you move or delete it.

Scanning from a Windows Application

You can use the C50 to scan documents directly into a Windows
application that supports a TWAIN interface (such as Corel Print House
Magic). Some applications allow multiple page scans, while others do
not. If you are unsure whether your Windows application supports this
feature, refer to your user documentation for the application.
The following instructions summarise the procedures for scanning an
image. For specific information about scanning with your Windows
application and specifying MultiPASS as the scan device, refer to the user
documentation for the application.
To scan an image from a Windows application:
1. Place the image you want to scan face down in the ADF (automatic
document feeder ) of the C50.
2. In your Windows application, choose the command to scan a
document.
In some applications, the appropriate command is listed on the menu
as Acquire or Acquire Image.
Chapter 6 Scanning 6-5