Switching Off - PIEPS iprobe ONE 220 Manual

De eN eS Fr
iproBE oNE 220 iproBE oNE 260
1 iPROBE handle
2 The optical target indicator
will blink while approaching
every avalanche transceiver
3 The acoustic target indicator
will „beep" while approaching
every avalanche transceiver
4 oN/off button: clear and
simple activation/deactivation
by pressing the button 3 times
5 Quick-closing latch
for efficient assembly
of the probe
6
Durable tubes made of
extremely light and high
quality carbon fiber/aluminum –
easy to fixate with velcro strap
7 Special coating for perfect
grip – even with gloves
8
Centimeter scale
to estimate burial depth
and for snow profiles
9 probe tip with integrated
receiver locates every
avalanche transceiver
14 | 08/12
IT CZ SK rU
4
6
8 9
rU SK
DeAr WINTer SporTS eNTHUSIAST!
Congratulations on having purchased a PIEPS iPROBE ONE. The
PIEPS iPROBE ONE is an electronic probe (digital technique) with an
automatic deactivating function and an optical and acoustic target
indicator for every standard transceiver EN300718.
The PIEPS iPROBE ONE is designed to determine the position of a
buried victim. Together with the beacon and the avalanche shovel
it belongs to the recommended standard avalanche safety gear of
backcountry skiers, freeriders or mountain rescuers!
IMporTANT! A close study of avalanche prevention techniques is
equally essential as is regular practicing for the event of an avalanche
rescue.
SWITCHING oN I SeLFCHeCK
1
Press the ON/OFF button 3 times within 2 seconds for simple and
clear activation of the PIEPS iPROBE ONE.
2
During power-on the PIEPS iPROBE ONE will carry out a self-check
3
where the battery, antenna and electronic are tested. Both LED-indi-
cation lights will show and a permanent acoustic signal (piiiiiiiiiiiep)
is emitted for one second.
5
iproBE oNE ok: Switching into check-mode A
■
iproBE oNE error: Permanent acoustic signal
■
(piep_piep_piep_...)
Battery replacement:
■
Acoustic signal for 3 seconds
(piep_piep_piep_...)
Check the battery
(polarity and voltage) and
replace it if required.
7
IMporTANT! During an extended period of non-use the battery has
to be taken out of the PIEPS iPROBE ONE. Damages because of leaked
batteries are not included in the warranty.

SWITCHING oFF

Press the ON/OFF button 3 times within 2 seconds for switching off
the PIEPS iPROBE ONE. An acoustic signal is emitted (prrrrie).
CZ IT Fr eS eN De
08/12 | 15