Layout Options - Canon imageCLASS MF5730 Software Manual

[Paper List]
[Name of Custom Paper Size]
[Unit]
2
[Paper Size]
[Register]
[Delete]

■ Layout Options

Clicking [Layout Options...] in the [Page Setup] tab sheet opens the [Layout
Options] dialog box. This dialog box enables you to print pages with a page frame,
header, and footer. This option is disabled when [Page Layout] in the [Page Setup]
tab sheet is set to [Poster] (see p. 2-10).
[Edging]
[Print Date]
2-14
Windows 98/Me Properties
Displays the paper sizes actually available. Selects a paper size from
which you can create a custom paper size.
NOTE
You can share the custom paper sizes with all printers connected to your
computer. Up to 50 sizes can be defined for [Custom Paper Size].
Specifies the name of custom paper.
Selects the unit of measurement of paper size ([Millimeter] or [Inch]).
Specifies the width and height of the custom paper.
NOTE
Be sure that [Width] does not exceed [Height] when specifying the values.
Registers the custom paper and adds its name to [Paper List].
Removes the selected custom paper from [Paper List].
NOTE
You cannot delete a pre-defined paper size.
Adds a page frame to be printed on each page. 11 options are
available.
Selects if the date is printed on each page or not. Six positions to print
the date are available.