Canon imageCLASS MF5730 Software Manual page 144
Imageclass mf5730 series
Hide thumbs
Also See for imageCLASS MF5730:
- Basic manual (139 pages) ,
- Setup instructions (8 pages) ,
- Technical information (2 pages)
Table of Contents
Advertisement
[Enable 48/16 bit
Output]
[Automatically Quit ScanGear MF after Scanning]
3
■ [Color Settings] Tab
Click one of the following. The default setting is [Recommended].
[Recommended] Vividly reproduces the tone of a document on the screen. Normally
3-42
Setting Preferences and Scanning with ScanGear MF
[Color (Documents)]
This setting is not available for this model.
[Text Enhanced]
The document is scanned in [Text Enhanced] mode when the [Black
and White] setting is configured in the application.
IMPORTANT
These settings will be invalid in UI mode (the mode in which the [ScanGear
MF] dialog box is displayed).
This setting is not available for this model.
If selected, the [ScanGear MF] dialog box quits automatically after the
image is scanned. This setting is not selected by default. Some
applications will automatically quit ScanGear MF after scanning
irrespective of this setting.
this settings is recommended.
Advertisement
Table of Contents
