Edit Watermark - Canon imageCLASS MF5730 Software Manual

■ Edit Watermark

Clicking [Edit Watermark...] in the [Page Setup] tab sheet opens the [Edit
Watermark] dialog box. This dialog box enables you to insert a text string as a
watermark onto pages. This option is enabled only when the [Watermark] check
box is selected in the [Page Setup] tab sheet (see p. 2-9).
2
[Watermark List]
[Add]
[Delete]
[Position]
2-12
Windows 98/Me Properties
Displays the names of registered watermarks. The preview image in the
upper left part of the dialog box displays the selected watermark with the
specified settings reflected.
Registers a new watermark. Clicking this button adds a blank name field
in [Watermark List] in which you enter the name of watermark to be
registered. Up to 50 watermarks can be registered.
Removes the selected watermark from [Watermark List].
NOTE
You cannot delete a pre-defined watermark.
Specifies the position where the watermark is printed on each page. You
can enter the values in the [X] and [Y] edit boxes (in a range between
–50 and +50), or use the X and Y slide bars to move the position.