Brother DCP-145C User Manual page 68

Printing (continued)
Difficulty
Cannot perform '2 in 1 ' or '4 in 1 '
printing.
Print speed is too slow.
Photo paper does not feed
properly.
Colour Enhancement is not
working correctly.
Machine feeds multiple pages
There is a paper jam.
Printed pages are not stacked
neatly.
Machine does not print from Adobe
Illustrator.
Copying Difficulties
Difficulty
Vertical streaks appear on copies
Poor copy results when using the
ADF (DCP-185C only)
Vertical black line appears in
copies (DCP-185C only)
Fit to Page does not work properly. Make sure your source document is not skewed. Reposition the document and try
60
Suggestions
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Advanced tab. Also, click the Color Settings, and make sure you uncheck
Colour Enhancement.
Set the borderless feature off. Borderless printing is slower than normal printing.
®
(See Printing for Windows
User's Guide on the CD-ROM.)
When you print on Brother photo paper, make sure you always load one additional
sheet of photo paper first before loading the paper you want to print on.
Clean the paper pick-up roller. (See Cleaning the paper pick-up roller on page 72.)
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
Make sure the paper is loaded correctly in the paper tray. (See Loading paper and
other print media on page 8.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
See Printer jam or paper jam on page 66. Make sure the paper length guide is
adjusted to the paper size. Do not extend the paper tray when you load A5 or
smaller size paper.
Make sure you are using the paper support flap. (See Loading paper and other
print media on page 8.)
Try to reduce the print resolution. (See Printing for Windows
®
Faxing for Macintosh in the Software User's Guide on the CD-ROM.)
Suggestions
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner on page 71.)
Try using the scanner glass. (See Using the scanner glass on page 18)
Black vertical lines on copies are typically caused by dirt or correction fluid on the
glass strip. Clean the glass strip. (See Cleaning the scanner on page 71)
again.
or Printing and Faxing for Macintosh
®
in the Software
®
or Printing and