Cleaning The Scanner - Brother DCP-145C User Manual

b
Wipe the outside of the machine with a
soft cloth to remove dust.
c
Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d
Wipe the inside and outside of the paper
tray with a soft cloth to remove dust.
e
Close the output paper tray cover and
slowly push the paper tray completely
into the machine.
Troubleshooting and Routine Maintenance

Cleaning the scanner

a
Lift the document cover (1). Clean the
scanner glass (2) and white plastic (3)
with a soft lint-free cloth moistened with
a non-flammable glass cleaner.
1
2
b
(DCP-185C only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a soft lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
B
3
B
71