To Uninstall The Installed Software - Canon imageCLASS MF4570dn Starter Manual

If You Want to Uninstall the Installed Software
If you do not need the printer driver, fax driver, scanner driver, or MF Toolbox, you can uninstall them with the following
procedure.
1.
Confirm the following points.
•
You must be have administrative privileges on the computer
•
You should have the installation software (in case you want to re-install the drivers)
•
You have closed all applications on your computer
2.
Delete the software.
* If your machine is connected to a computer via the WSD network, you may not uninstall the drivers or software following the
procedures below. Refer to "Uninstalling the Software" in the e-Manual to install MF Drivers.
For the printer/fax/scanner driver
From the [Start] menu, click [(All) Programs] → [Canon] →
[MF4500 Series] → [Uninstall Drivers].
Click.
For MF Toolbox
From the [Start] menu, click
[(All) Programs] → [Canon] →
[MF Toolbox 4.9] →
[Toolbox Uninstall].
A-3
A-3
Click.
Click.
Click.
Click.