Installing Via Network Connection - Canon imageCLASS MF4570dn Starter Manual

1 2
Preface Installing the Machine

Installing via Network Connection

1.
Check the following
points.
2.
Turn on the computer, and then log on as a user with
administrative privileges.
If you have already logged on, exit all applications which are running.
3.
Install the MF Drivers and MF Toolbox.
* If you are operating in the IPv6 environment, you may not install the drivers or software following the procedures below.
Refer to "Installing the MF Drivers Via the WSD Network (MF4570dn Only)" in the e-Manual to install MF Drivers.
* You may not use the scan function in the IPv6 environment.
Insert the CD-ROM.
If the top screen does not appear
•
Windows 2000, XP, and Server 2003
1. From the [Start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
•
Windows Vista, 7, and Server 2008
1. Enter "D:\Minst.exe" in [Search programs and files] or [Start
Search] under the [Start] menu.
2. Press the [ENTER] key on the keyboard.
* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM
drive name may differ depending on the computer you are using.
Read the contents of the License
Agreement.
Click.
3
Configuring and Connecting the Fax

The computer and machine are connected via the network.

The power of the machine is turned ON.

IP addresses are properly set up.
Click.
Click.
4
Connecting to a Computer and
Installing the Drivers
[Easy Installation] performs the installation of the
following software.
•
Printer driver
•
Fax driver
•
Scanner driver
•
MF Toolbox
To add the following software and manual to the
installation, select [Custom Installation].
•
Presto! PageManager
•
e-Manual
e-Manual "Installing the MF Drivers and MF
Toolbox"
Click.
If the following dialog box appears
Appendix
Click.
Click.
17