Table of Contents
Advertisement
■ Edit Watermark
Clicking [Edit Watermark] in the [Page Setup] tab sheet opens the [Edit Watermark] dialog box. This
dialog box enables you to insert a text string as a watermark onto pages. This option is enabled only
when the [Watermark] check box is selected in the [Page Setup] tab sheet (see p. 3-5).
[Watermark List]
[Add]
[Delete]
[Position]
[Move to Center]
[Angle]
[Name]
[Text]
[Font]
[Style]
[Size]
Displays the names of registered watermarks. The preview image in the
upper left part of the dialog box displays the selected watermark with the
specified settings reflected.
Registers a new watermark. Clicking this button adds a blank name field in
[Watermark List] in which you enter the name of watermark to be
registered. Up to 50 watermarks can be registered.
Removes the selected watermark from [Watermark List].
Specifies the position where the watermark is printed on each page. You
can enter the values in the [X] and [Y] edit boxes (in a range between –50
and 50), or use the X and Y slide bars to move the position.
Relocates the watermark to the page center.
Specifies the angle of watermark. You can select the corresponding radio
button, or use the slide bar to move the angle.
Displays the name of the currently selected watermark.
Displays the text string of the currently selected watermark.
Selects the font type of the watermark.
Selects the font style of the watermark. Available styles are [Regular],
[Italic], [Bold] and [Bold Italic].
Specifies the font size of the watermark (1 to 500).
Windows 98/Me Properties
3
3-7
Advertisement
Table of Contents
